Sr.No. Description
Price
………………………………………………………………………………………………
…..(Rs.)………
Our Model VI-300, with all the technical details
As given. IZOD &
CHARPY
2.
A) Rockwell cum Brinell Hardness
Testing Machine
Our Model VAB-250, with all the technical details
As given.
85,000.00
Our Model VI-300, with all the technical details
As given. IZOD & CHARPY
2. A) Rockwell
cum Brinell Hardness Testing
Machine
Our Model VAB-250, with all the technical details
3. A.
Universal Testing Machine – 100 kN Mechanical
Our Model: - UTV – 10
With all Technical Details as given.
With Compression Test, Tension Test,Transvers Test
4. Applied models:-
Ø Simple Screw jack
Ø Universal force table
Ø Single purchase crab
Ø Double purchase crab
Ø Differential Wheel and Axle
Ø Apparatus for law of parallelogram law of triangle
Ø
polygon law of forces
TERMS AND CONDITION :-
IMPACT TESTING MACHINE
TECHNICAL
DATA (Charpy Test )
Pendulum :
Maximum Impact Engery of pendulum |
30 Kg-m / 300 Joules |
Angle of drop of pendulum |
141 - 80 |
Effective weight of pendulum |
20.59 Kg / 21 - 02 Kg. |
Minimum value of scale graduation |
0.2 Kgm / 2 Joules |
Striking velocity of pendulum |
5.3465 m/sec. |
Permissible total friction loss of correspondly indicated engery |
0.5 % |
Distance from axis of rotation of pendulum to center of specimen |
815 mm |
Height of physical percussion center from the center of specimen |
± 8.15 mm |
SUPPORTS FOR SPECIMEN
:
Distance between supports |
40 mm + 0.5 mm - 0.0 |
Angle of test piece supports |
780 to 800 |
Angle of inclination of supports |
00 |
Radius of supports |
1 mm to 1.5 mm |
STRIKING EDGE FOR
CHARPY TEST :
Maximum width of striker |
18 mm |
Angle of striking edge |
300 ± 10 |
Radius of curvature of striking edge |
2 mm to 2.5 mm |
SPECIMEN FOR CHARPY
TEST :
acc IS : 1757 -1973 & IS : 1499 – 1959 |
Length : 55 mm ± 0.6 mm |
and also BS : 131 : Part 2 & 3 1972 |
Width : 10 mm ± 0.11 mm |
Dimensions ( Refer Drg. No. 2 ) |
Height : 10 mm ± 0.11 mm |
Overall dimensions of the machine |
1.4 m X 0.5 m X 1.9 m |
Weight of the machine |
300 Kg. ( Approx. ) |
.
TECHNICAL DATA (
Izod Test )
Pendulum : |
|
Maximum Impact
Engery of pendulum
|
16.52 Kg-m / 168
Joules |
Angle of
drop of pendulum |
900 |
Effective weight
of pendulum |
21.79 Kg / 21 - 02 Kg. |
Minimum value
of scale graduation |
0.14 Kgm / 2
Joules |
Striking velocity
of pendulum |
3.99 m/sec. |
Permissible total
friction loss of
correspondly indicated engery |
0.50% |
Distance from
axis of rotation
of pendulum to
the point of
specimen hit by
the hammer. |
815 mm |
Height of
physical percussion center
from the striking
point of the
hammer. |
± 8.15
mm |
Distance between
base of specimen
notch ( or top
of grips ) and
the point of
specimen hit by
the hammer. |
22 mm
± 0.5 mm |
STRIKING EDGE
OF THE PENDULUM |
|
Angle of
striking edge |
750 ± 10 |
Radius of
curvature of striking
edge |
0.5 mm
to 1 mm |
Aangle between
the normal to
the specimen and
the underside face
of the striker
at striking point. |
100 ±
10 |
ROCKWELL CUM BRINELL HARDNESS TESTING MACHINE
TECHNICAL DATA
1 Model
VAB - 250 |
4.2 Maximum Test Height 290mm |
4.3 Depth of Thread 150mm |
4.4 Maximum Depth of screw below base 310mm |
Dimensions of machine Base (Approx) 210mm × 510mm Height (Approx) 845mm |
4.6 Net weight (Approx) 125 Kg. |
UNIVERSAL
TESTING MACHINE
TECHNICAL DATA.
MEASURING RANGES |
UNIT |
UTV 10 |
UTV 20 |
UTV 40 |
UTV 60 |
UTV 100 |
Range |
KN |
0-100 |
0-200 |
0-400 |
0-600 |
0-1000 |
Least Count |
KN. |
0.2 |
0.4 |
1 |
1 |
2 |
Range |
KN |
0-50 |
0-100 |
0-200 |
0-300 |
0-500 |
Least Count |
KN. |
0.1 |
0.2 |
0.5 |
0.5 |
1 |
Range |
KN |
0-25 |
0-50 |
0-100 |
0-120 |
0-250 |
Least Count |
KN |
0.05 |
0.1 |
0.25 |
0.25 |
0.5 |
Range |
KN |
0-10 |
0-20 |
0-40 |
0-60 |
0-100 |
Least Count |
KN |
0.02 |
0.04 |
0.1 |
0.1 |
0.2 |
Margin
of error ± 1 % above
20 % of the
full Scale. |
SPECIFICATIONS : For Tension Test
: |
|
|||||
MODEL |
UNIT |
UTV - 10 |
UTV - 20 |
UTV - 40 |
UTV - 60 |
UTV-100 |
Tensile clearance
at fully descended working
piston |
mm |
50 - 700 |
50 - 700 |
50 - 700 |
50 - 800 |
50 - 850 |
Jaws for round
bar |
mm |
10 - 20 |
10 - 20 |
10 - 25 |
10 - 25 |
10 - 25 |
|
|
20 - 30 |
20 - 30 |
25 - 40 |
25 - 40 |
25 - 45 |
|
|
----- |
----- |
------- |
40 - 55 |
45 - 70 |
Jaws for sheet metals |
mm |
0 - 10 |
0 - 10 |
0 - 15 |
0 - 15 |
0 - 22 |
|
|
10 - 20 |
10 - 20 |
15 - 30 |
15 - 30 |
22 - 44 |
|
|
|
|
|
|
44 - 65 |
Width |
mm |
50 |
50 |
65 |
70 |
70 |
For Compression Test
: |
|
|
|
|
|
|
Clearance between compression plates at
fully descended working
piston |
mm |
0 - 700 |
0 - 700 |
0 - 700 |
0 - 800 |
0 - 850 |
Diameters of
compression plates |
mm |
120 |
120 |
120 |
120 |
160 |
For Transverse Test : |
|
|
|
|
|
|
Max. clearance
between Supports. |
mm |
500 |
500 |
500 |
600 |
750 |
Width of
rollers |
mm |
160 |
160 |
160 |
160 |
160 |
Diameter of
rollers |
mm |
30 |
30 |
30 |
50 |
50 |
Radius of
bending Pane |
mm |
6 - 12 |
6 -12 |
12 - 16 |
16 - 22 |
16 - 22 |
Clearance between columns |
mm |
500 |
500 |
500 |
600 |
800 |
Ram Stroke |
mm |
150 |
200 |
200 |
250 |
250 |
Oil Pump Output |
lit / min. |
1.5 |
1.5 |
3 |
3 |
4.5 |
Motor for oil
pump (3 Ph, 50
Hz. ) |
H.P. |
1.0 |
1.0 |
2.0 |
2.0 |
3.0 |
Motor for crosshead (3 Ph, 50
Hz. ) |
H.P. |
0.33 |
0.33 |
0.33 |
0.5 |
0.5 |
Piston idling
feed adjustable upto |
mm/min. |
300 |
150 |
150 |
100 |
80 |
Recorading device : |
|
|
|
|
|
|
Load scale |
mm |
150 |
150 |
150 |
150 |
150 |
Elongation Scale 5 : 1 & 10
: 1 for all models |